Agilent 1260 Infinity G5611A Bio-inert Quaternary Pump HPLC with Seal

Agilent 1260 Infinity G5611A Bio-inert Quaternary Pump HPLC 600 bar with Seal Wash

Important note: The instanpilot/gameboy controller is not included in this sale.

Used. The Agilent 1260 Infinity G5611A Bio-inert Quaternary Pump powers on and is recognized by an Agilent Instant Pilot, which displays the module information, firmware revision (A.06.55), and installed Seal Wash Pump option, as shown in the pictures. A pressure test was initiated but not completed, so the pump has not been tested under flow. Includes power cord only. Instant Pilot controller, CAN cables, solvent bottles, and accessory kit are NOT included. Good overall cosmetic condition with normal signs of previous use; the rear panel shows water spots, and there are inventory stickers on the side. Sold as shown in the pictures.

The Agilent 1260 Infinity Bio-inert Quaternary Pump delivers solvents for HPLC and UHPLC analysis of biomolecules. Its solvent flow path is free of iron and stainless steel (titanium, gold, sapphire, PEEK, PTFE), making it ideal for high-salt buffers and extreme pH conditions in size-exclusion, ion-exchange, reversed-phase, and peptide mapping applications.

Specifications:
- Hydraulic system: dual piston in series, servo-controlled variable stroke, floating pistons, active inlet valve, integrated 4-channel degasser
- Settable flow range: 0.001 – 10 mL/min (0.001 mL/min increments)
- Pressure: 0 – 600 bar (0 – 8700 psi) up to 5 mL/min; 0 – 200 bar up to 10 mL/min
- Gradient formation: low-pressure quaternary mixing via high-speed proportioning valve
- Composition range: 0 – 95% or 5 – 100%, user selectable
- Flow precision: < 0.07% RSD or < 0.02 min SD
- Flow accuracy: ± 1% or 10 µL/min
- Pressure pulsation: < 2% (typically < 1.3%)
- Delay volume: 600 – 800 µL
- pH range: 1.0 – 13 (14 short term)
- Wetted materials: titanium, gold, platinum-iridium, sapphire, PEEK, PEKK, PTFE
- Active seal wash: included
- Communications: CAN, GPIB, RS-232C, APG Remote; LAN optional
- Power: 100 – 240 VAC, 180 VA, 50/60 Hz

Brand: Agilent Technologies
MPN: G5611A
Model: 1260 Infinity Bio-inert Quaternary Pump
Type: HPLC Quaternary Pump
Used with: Agilent 1260 Infinity Bio-inert LC System
SN: DEAB600396
Country of Origin: Germany
HS Code: 9027.20.60.50

- Settable flow range: 0.001 – 10 mL/min (0.001 mL/min increments)
- Pressure: 0 – 600 bar (0 – 8700 psi) up to 5 mL/min; 0 – 200 bar up to 10 mL/min
- Flow precision: < 0.07% RSD or < 0.02 min SD
- Flow accuracy: ± 1% or 10 µL/min
- Pressure pulsation: < 2% (typically < 1.3%)
- Delay volume: 600 – 800 µL
- pH range: 1.0 – 13 (14 short term)

Used

Used. The Agilent 1260 Infinity G5611A Bio-inert Quaternary Pump powers on and is recognized by an Agilent Instant Pilot, which displays the module information, firmware revision (A.06.55), and installed Seal Wash Pump option, as shown in the pictures. A pressure test was initiated but not completed, so the pump has not been tested under flow. Includes power cord only. Instant Pilot controller, CAN cables, solvent bottles, and accessory kit are NOT included. Good overall cosmetic condition with normal signs of previous use; the rear panel shows water spots, and there are inventory stickers on the side. Sold as shown in the pictures.

35lbs

G5611A

الشحن داخل الولايات المتحدة
يؤهل هذا المنتج للشحن المجاني إلى الولايات المتحدة القارية.

الشحن الدولي
نشحن دوليًا. يتحمل المشتري مسؤولية أي رسوم جمركية أو ضرائب أو متطلبات جمركية. اتصل بنا لطلب فاتورة لأغراض التخليص الجمركي. نوصي بالتحقق من هيئة الجمارك المحلية لديك قبل الشراء.

الشحن في الليلة التالية
يسعدنا تلبية طلب الشحن المستعجل باستخدام حسابك لدى UPS أو FedEx. يرجى الاتصال بنا لتزويدنا بمعلومات حسابك.

يؤهل هذا المنتج للإرجاع المجاني.

لدينا سياسة إرجاع لمدة 30 يومًا من تاريخ الاستلام.

لمعرفة المزيد، يرجى زيارة صفحتناسياسة الإرجاع.